About this product
Sconablend TPE 40 X 111-1 is a compound for thermoplastic processing with rubber - like properties.
Sconablend TPE 40 X 111-1provides a number of outstanding physical properties:
high elasticity, flexural and tensile strength
good flexibility at low temperatures and ageing properties
reuse of in-plant waste without difficulties
excellent processing properties
applicable for hard - soft connections
Properties / Application
With its wide range of excellent properties, Sconablend TPE 40 X 111-1 can be used for numerous
applications e.g. technical goods for the automotive industry and handles for sporting goods.
Processing
Sconablend TPE 40 X 111-1 can be processed by injection-moulding and extrusion.
Injection-moulding melt temperatures ranging from 180°C to 220°C and mould temperatures ranging from 30°C
to 50°C are recommended.
The injection rate should be as high as possible.
The extrusion of Sconablend TPE 40 X 111-1 requires melt temperatures between 160°C and 190°C.
Sconablend TPE 40 X 111-1provides a number of outstanding physical properties:
high elasticity, flexural and tensile strength
good flexibility at low temperatures and ageing properties
reuse of in-plant waste without difficulties
excellent processing properties
applicable for hard - soft connections
Properties / Application
With its wide range of excellent properties, Sconablend TPE 40 X 111-1 can be used for numerous
applications e.g. technical goods for the automotive industry and handles for sporting goods.
Processing
Sconablend TPE 40 X 111-1 can be processed by injection-moulding and extrusion.
Injection-moulding melt temperatures ranging from 180°C to 220°C and mould temperatures ranging from 30°C
to 50°C are recommended.
The injection rate should be as high as possible.
The extrusion of Sconablend TPE 40 X 111-1 requires melt temperatures between 160°C and 190°C.
Sconablend TPE 40 X 111-1 is not hygroscopic and therefore drying is not necessary if the material is stored
properly.
